|Place of Origin:||China|
|Certification:||CE ISO ROHS FCC FAD|
|Minimum Order Quantity:||1pcs|
|Packaging Details:||Wooden Box|
|Payment Terms:||Western Union, MoneyGram, T/T, L/C|
|Supply Ability:||50000Set / month|
|Name:||Inductively Coupled Plasma Optical Emission Spectrometer||Output Power:||800 -1500W|
|Total Argon Consumption:||≤14L/min||Resolution:||< 0.0065nm@200nm|
|Repeatability:||RSD < 1%||Stability:||RSD <1.5%(within 2 Hours)|
|Wavelength Range:||160nm - 1000 Nm||Plasma Overview:||Radial|
full spectrum laboratory equipment spectrophotometer,
direct reading laboratory equipment spectrophotometer,
direct reading laboratory spectrophotometer
Inductively Coupled Plasma Optical Emission Spectrometer ICP-6810
ICP-6810 is a full-spectrum direct-reading inductively coupled plasma emission spectrometer for the determination of trace and trace elements in different substances (dissolved in nitric acid, hydrochloric acid, hydrofluoric acid, etc.).
It is widely used in environmental protection, petroleum products, rare earth, semiconductor, geology, metallurgy, chemical industry, clinical medicine, food, biological samples, criminal science, agricultural research and other fields.
The use of all-solid-state rf power supply, with small size, high efficiency, stable output power, with a variety of protection functions and many other advantages, the load using fully automatic matching technology, matching speed, improve the efficiency of the use of power supply and the stability of the instrument, and make the whole ignition process simple and convenient.
Adopting four-channel automatic design, the rotational speed can be set up according to the test demand to adjust the flow rate, carrier gas, plasma gas, auxiliary gas are all controlled by advanced mass flow controller, at the same time can be equipped with imported high salt nebulizer, imported hydrofluoric nebulizer and so on to meet the customer's various test needs.
The middle step grating prism cross dispersion mode is adopted, there is no moving optical element, the ultra low stray light design is combined with the unique optical design, nitrogen distributed blowing, imported optical elements, intelligent and accurate automatic wavelength calibration algorithm.
In American thermoelectric CID detector, the 160-1000nm range is continuously covered, and the intensity integral values of all analytical spectral lines are read out at one exposure to speed up the analysis.
Technical parameters of the instrument
Instrument technical index
RFPower technical parameter
solid-state RF Power supply, with function of automatch
|Power Output Stability||
|Escaped RF radiation||
30cm away from the instrument, electric fiekd: E<2Vtm
Sampling System Technical Parameter
|Output working coil imer diameter||
Three concentric, extemal diameter 20mm
Outer dameter 6mm
|Double barrel atomizing chamber||
Outer diameter 34mm
Gas Flow Controls
|Plasma Argon Flowmeter||
|Auxiliary Argon Fiowmeter||
|Auxiliary Carrier Argon Flowmeter||
|Pressune Maintaining Value||
20-25℃,Rate of Flow>5L/min,Hydraulic Pressure>0.1MPa
Technical index of spectrometer
Midde step grating, 52.67 lp/mm, 64 sparkle angle
F≤8, ultra-high luminous flux to ensure the detection limit and sensitivity of the instrument
Equivalent background concentration of 10000 ppm Ca solution at As 189.042 nm <2 ppm
Precision constant temperature, 35±0.1℃, Distributed nitrogen punging, normal purging 1.8L/min, fast purging 3.8L/min
Testing device technical specifications
27.6mm x27.6mm, 1024x1024 addressing detection units
Non-destructive read (NDRO, full reading (FF) and arbitrary read integral (RAI)
Contact Person: MacylabAlice